Digital DIN Rail Transmitter - Loop Powered : SEM1801/2XTC

€0,00
SKU SEM1801XTC
ATEX IECEx Rail Temperature transmitter for thermocouple sensors
  • K, J, N, E, T, R, S, L, U, B, C(W5), D(W3), G(W)
  • ATEX AND IECEx APPROVED
  • SINGLE AND DUAL CHANNEL VERSIONS
  • (4 to 20) mA LOOP POWERED
  • SENSOR OFFSET AND OUTPUT ALIGNMENT
  • ISOLATION INPUT TO OUTPUT

The SEM1801 / 2 XTC ATEX rail temperature transmitter accepts thermocouple temperature sensors and converts the sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal. Two versions are available: single or dual channel ATEX / IECEx approved for hazardous areas. PC configuration allows the user to select TC type, range, filter, units, linearisation and burnout direction, without requiring calibration equipment. Additionally, the user may read live process data when connected to the PC (in the safe area), this allows for sensor offset, and output alignment calibration, where the user can enter values to match the actual process, therefore reducing system errors.
If required, the desired range can be specified at the time of order, removing the need for user configuration.
If the range is not specified, then the transmitter will be shipped with the default range of (0 to 1000) °C type K burnout high and filter off.

FEATURE HIGHLIGHTS
SENSOR REFERENCING

The SEM1801/2XTC sensor referencing via the Windows based USBSpeedlink software allows for close matching to a known reference sensor eliminating possible sensor errors.

THERMOCOUPLE TYPES

As standard the SEM1801/2TXC has all common thermocouple sensors available from its software library with extra sensors available.

SENSOR BURN OUT DETECTION

If a sensor wire is broken or becomes disconnected the SEM1801/2XTC output will automatically go to its user defined level (upscale or downscale) or a pre-set value.

STABILITY

The SEM1801/2TCX transmitter incorporates the latest digital technology to ensure accurate, low drift performance.

DOWNLOAD

Datasheet SEM1801XTC